Carbon Residue Tester Manufacturer

Carbon Residue Tester TBT-268

Item Code:TBT-268 Features:TBT-268 is designed referring to ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products.

Description
Referring Standard
Features
Technical Specification

TBT-268 is designed referring to ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products.

It is used to determine the amount of carbon residue of petroleum products after evaporation and pyrolysis, so as to check coke forming property of petroleum products.

ASTM D189

Simple design with full accessories, the test can be done as loon as equip civil gas.

Porcelain crucible	About 30ml
Inner iron crucible	About 75±5ml
Outer iron crucible	About 190±10ml with cover
Supporter	Height: 250±10mm Bore diameter: 130±5mm
Flame shield	Diameter of upper port: 90±2mm Diameter of lower port: 82±2mm
Round iron cover	The height of underpart is 50~53mm The height of cone in the middle is 25±2mm There is a piece of Ф3mm iron wire as the fire bridge on the top The height is 50±3mm as the indicator of Max. height
Blowtorch type	Gas torch
Size	Ф130mm×400mm

Other Products

Select All

Product Name:

Engler Viscometer

Model:

TBTWNE-1A

Description:

TBTWNE-1A is referring to ASTM D1665 Standard Test Method for Engler Specific Viscosity of Tar Products.

Product Name:

Retroreflection Measurement Standard Device

Model:

TBTAS-CA

Description:

JJF 1796-2020, JJF 1809-2020, GB/T 26377-2010, GB/T 16311-202X, GB/T 24970-2020, GBT 24725-2009, GB/T 18833--2012, GB/T 3979-2008, GB 11564-2008, GB 19151-2003, JT/T690—202X.

Product Name:

LCD Display Oxygen Bomb Calorimeter

Model:

TBTXRY-1A+

Description:

TBTXRY-1A+ is used to determine calorific value of combustible materials(heat capacity is 14000~15000J/K) such as petroleum products without water(gasoline, jet fuels, diesel oil & fuel oils), coal, coke and paraffin, etc.

Product Name:

Penetrometer for Grease

Model:

TBT-2801E1

Description:

TBT-2801E1 is designed referring to ASTM D217 Standard Test Method for Cone Penetration of Lubricating Grease and Petrolatum.

Product Name:

Retroreflective Color Measurement System

Model:

TBTAS-CB

Description:

JJF 1796-2020, JJF 1809-2020, GB/T 26377-2010, GB/T 16311-202X, GB/T 24970-2020, GBT 24725-2009, GB/T 18833--2012, GB/T 3979-2008, GB 11564-2008, GB 19151-2003, JT/T690—202X.

Product Name:

Penetrometer

Model:

TBT-2801E1

Description:

TBT-2801E1 is made as per ASTM D5 Standard Test Method for Penetration of Bituminous Materials.

Product Name:

Penetrometer for Petroleum Waxes

Model:

TBT-2801E1

Description:

TBT-2801E1 is designed referring to ASTM D1321 Standard Test Method for Needle Penetration of Petroleum Waxes.