Pensky-Martens Closed-Cup Flash Point Tester Manufacturer

1. This instrument is designed as per GB/T261 and ASTM D93.

2. The heating power is continuously adjustable. The power is shown visually by voltmeter.The temperature control mode is advanced and reasonable.

3. The structure is designed small and exquisite.The stainless-steel table board is beautiful and easy to clean.

4. Operation is easy.Test results are precise.It has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes.

Power supply	AC (220±10%)V, 50Hz.
Heating device	The heating power is continuously adjustable from 0 W to 600W.
Heating rate:	(1～12)℃/min；Controllable and adjustable.
Stirring rate	Procedure A: (90～120)RPM, Procedure B: (250±10)RPM
Oil cup	(1) Inner diameter: 50.7mm～50.8mm. (2) Depth: 55.7mm～56.0mm (3) The scribed line depth of capacity of testing oil: 33.9mm～34.3mm. (4) Capacity of testing oil:about 70ml
Igniting device	(1) Igniting source: gas（or other civilian fuels，the same below） (2) Electric ignition. Gas flame diameter:3.2mm～4.8mm
Thermometers	Mercury-in-glass thermometer.Specifications are as below: (1)Scale -5℃～110℃, division 0.5℃。 (2)Scale 20℃～150℃, division 1℃。 (3)Scale 90℃～370℃, division 2℃。
Ambient temperature	≤ 35℃
Relative humidity	≤ 85％
Maximum power consumption	650W

Pensky-Martens Closed-Cup Flash Point Tester TBT-261

Other Products