TBT-UT500B Ultrasonic Flaw Detector
Technical Specification:
Range |
0 to 9999 mm, at steel velocity |
Bandwidth |
(0.5 ~ 10) MHz |
Material Velocity |
1000 to 9999m/s |
Display Delay |
-20 to 3400 µs |
Probe Delay/Zero Offset |
≤ 3% |
Sensitivity |
110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked. |
Test Modes |
Pulse echo, dual element and thru-transmission |
Pulser |
Tunable Square Wave Pulser |
Pulse Repetition Frequency range |
10 Hz to 1000 Hz |
Pulse Energy |
Low, Medium and High |
Damping: |
100, 200, 400 ohms |
Bandwidth (amplifier bandpass ) |
0.5 to 15 MHz |
Gate Monitors |
Two independent gates controllable over entire sweep range |
Rectification |
Positive halfwave, negative halfwave, fullwave, RF |
System Linearity |
Horizontal:+/-0.2% FSW, Vertical: 0.25% FSH, Amplifier |
Accuracy |
±1 dB |
Reject (suppression) |
0 to 80% full screen height |
Units |
Inch or millimeter |
Transducer Connections |
BNC or LEMO |
Power Requirements |
AC Mains 100-240 VAC, 50-60 Hz |
Dimensions |
263H×170W×61D mm |
Operating Temperature |
-10℃ to 50℃ |
Storage Temperature |
-30℃ to 50℃ |
Any questions, please contact us.
Email: sales@tbt-scietech.com;toni_gu@tbt-scietech.com
Tel: 86-25-8472 1577/8472 1579/8472 1907